

-
Heat shrink products for automotive parts
-
Heat shrink products in military and aerospace fields
-
Thin Wall Single Wall Heat Shrink Products
-
Heat shrink products for marking
-
Heat shrink products for communication
-
Medium and heavy wall with glue or without glue heat shrink products
-
Power cable accessories and other heat shrink products
-
Busbar insulation heat shrink products for power switchgear
-
Heat shrink products for power transmission and Tubular busbar
-
Heat Shrink Terminal Products
-
Other heat shrink products
-
Braided Sleeve for Automotive
-
Braided Sleeve for Military
R-13 Self-winding tube
Introduction | |||
It is made of aramid fiber + PPS monofilament and has an open structure, which is easy to install and repair, and can be reused. It has the characteristics of high temperature resistance, high strength, corrosion resistance, mildew resistance, water and oil resistance, abrasion resistance, and cutting resistance. After the three-proof treatment, it can prevent the absorption of condensation that accumulates due to the extreme changes experienced by the aircraft. It is used for the outer wiring harness or cable of military electronic electromechanical equipment, instruments and radio equipment of aerospace, aviation, naval weapons and equipment. |
Features | |
Operating temperature: -60℃~200℃ | |
RoHS compliant | |
Standard color: Army green |
Technical Data | |||
Property | Unit | Requirement | |
Oxygen Index | % | ≥30 | |
Flame retardant | - | UL94 V0 | |
Surface resistance | GB/T12703.4-2010 | Ω | ≥1.0×109 |
Water resistance | GJB150.8A-2009 program Ⅲ-dripping water | - | impermeable |
Mold resistant | GJB150.10A-2009 | - | Not inferior to level 1 |
Salt spray resistance | GJB150.11A-2009 | - | No obvious change in appearance |
Tensile Strength | MPa | ≥70% of initial value | |
Resistant to heat and humidity | GJB150.9A-2009 | - | No obvious change in appearance |
Tensile Strength | MPa | ≥70% of initial value | |
Radiation resistant | QJ10004-2008 | - | No obvious change in appearance |
Tensile Strength | MPa | ≥70% of initial value |
Dimension | |||
Size | Inner diameter | Maximum outer diameter of wrapper | standard packaging m/roll |
003 | 3 | 4 | 100 |
005 | 5 | 6 | 100 |
008 | 8 | 9 | 100 |
010 | 10 | 11 | 100 |
013 | 13 | 14 | 50 |
016 | 16 | 17 | 50 |
019 | 19 | 20 | 25 |
025 | 25 | 27 | 25 |
029 | 29 | 31 | 25 |
032 | 32 | 34 | 25 |
038 | 38 | 40 | 25 |
050 | 50 | 52 | 25 |
Note: | |||
1.The inner diameter refers to the round diameter of the casing | |||
2.Products can be customized according to customer requirements | |||
3.Please refer to the product specification acknowledgement for detailed product parameters |
About
Contact
Address: Tangjia Industrial Park, Shihe Street, Puwan New District, Dalian
Tel: 0411-87166661 87166662 0411-87166663 87166665
International line: +86-411-87166669
E-mail: upolymer@upolymer.com
Copyright: Union Polymer Material Co., Ltd. Powerby:300.cn dalian 辽ICP备05006450号-1