

分类出来
-
Heat shrink products for automotive parts
-
Heat shrink products in military and aerospace fields
-
Thin Wall Single Wall Heat Shrink Products
-
Heat shrink products for marking
-
Heat shrink products for communication
-
Medium and heavy wall with glue or without glue heat shrink products
-
Power cable accessories and other heat shrink products
-
Busbar insulation heat shrink products for power switchgear
-
Heat shrink products for power transmission and Tubular busbar
-
Heat Shrink Terminal Products
-
Other heat shrink products
-
Braided Sleeve for Automotive
-
Braided Sleeve for Military
Number of views:
1000
S6/S6-TW Oil Resistant Polyolefin Elastomer Heat Shrink Tubing
Retail price
0.0
元
Market price
0.0
元
Number of views:
1000
Product serial number
Quantity
-
+
Stock:
0
1
Detail
Size specification
Introduction | |||
A soft radiation cross-linked polyolefin elastomer heat-shrinkable tube is used for the connection, insulation and protection of various wires and cables in military equipment that need to be resistant to temperature and oil. Insulation protection or coating, electronic |
Features | ||
Operating temperature: -75~150 ℃ | ||
Minimum full shrinkage temperature: 150 ℃ | ||
Shrink ratio: 2:1 | ||
GJB 7274-2011 compliant | ||
Excellent resistance to diesel, lubricating oil and hydraulic oil | ||
soft, flame retardant |
Technical data | ||||
Property | Test Method | Value | ||
Density | GJB 7274-2011 | ≤1.50g/cm3 | ||
Longitudinal change rate | GJB 7274-2011 | -10%~10% | ||
Restricted shrinkage(200℃/30分钟) | GJB 7274-2011 | No cracks on the surface | ||
Water absorption (23℃/24h) | GJB 7274-2011 | ≤2.0% | ||
Tensile Strength | GJB 7274-2011 | ≥11.7MPa | ||
Breakdown elongation | GJB 7274-2011 | ≥250% | ||
Heat shock (200℃/4h) | GJB 7274-2011 | No cracks, no flow, no dripping on the surface | ||
Aging(150℃/168h) Tensile Strength Breakdown elongation |
GJB 7274-2011 | ≥10.4MPa ≥200% |
||
Dielectric strength | GJB 7274-2011 | ≥11.9kV/mm | ||
Insulation withstand voltage(AC2500V·1min.) | GJB 7274-2011 | Not broken down | ||
Volume resistivity | GJB 7274-2011 | ≥1.0×109Ω·cm | ||
Liquid resistance(23℃/24h) Tensile Strength Breakdown elongation Dielectric strength |
GJB 7274-2011 | ≥ 10.4MPa ≥200% ≥7.9kV/mm |
||
flame retardancy | GJB 7274-2011 | The continuous burning time does not exceed 60S after leaving the fire | ||
Copper corrosion(135℃/16h) | GJB 7274-2011 | No dents or blackening of the copper surface | ||
low temperature flexibility(-55℃/4h) | GJB 7274-2011 | No cracks on the surface | ||
High and low temperature impact(-55℃/120℃) | GJB 7274-2011 | Tensile Strength≥10.4MPa 断裂伸长率≥200% |
||
salt spray | GJB 150.11 | 拉伸强度≥10.4MPa 断裂伸长率≥200% |
||
damp heat | GJB 150.9 | 拉伸强度≥10.4MPa 断裂伸长率≥200% |
||
mold | GJB 150.10 | 长霉程度不劣于1级 |
Dimension | |||||
规格 | As Supplied(mm) | After shrink (mm) | Wire mass(Max.) | Standard length | |
Inner Diameter(Min.) | Inner Diameter (Max.) | Wall thickness | g/m | m | |
常规壁厚 S6 | |||||
1.6/0.85 | 1.6 | 0.85 | 0.40±0.08 | 3.1 | 200 |
2.4/1.2 | 2.4 | 1.2 | 0.51±0.08 | 5.9 | 200 |
3.2/1.6 | 3.2 | 1.6 | 0.76±0.15 | 9.6 | 200 |
4.8/2.4 | 4.8 | 2.4 | 0.84±0.15 | 14.7 | 200 |
6.4/3.2 | 6.4 | 3.2 | 0.89±0.15 | 19.3 | 200 |
9.5/4.8 | 9.5 | 4.8 | 1.02±0.20 | 31.5 | 122 |
12.7/6.4 | 12.7 | 6.4 | 1.22±0.20 | 42.5 | 122 |
15.9/7.9 | 15.9 | 7.9 | 1.32±0.28 | 57.5 | 61 |
19.1/9.5 | 19.1 | 9.5 | 1.45±0.28 | 80.1 | 61 |
22.2/11.1 | 22.2 | 11.1 | 1.55±0.28 | 98.5 | 61 |
25.4/12.7 | 25.4 | 12.7 | 1.78±0.28 | 120.0 | 61 |
31.8/15.9 | 31.8 | 15.9 | 2.20±0.41 | 172.5 | 30.4 |
38.1/19.1 | 38.1 | 19.1 | 2.41±0.41 | 243.0 | 30.4 |
50.8/25.4 | 50.8 | 25.4 | 2.79±0.41 | 342.0 | 30.4 |
薄壁 S6-TW | |||||
1.6/0.85 | 1.6 | 0.85 | 0.40±0.08 | 3.1 | 200 |
2.4/1.2 | 2.4 | 1.2 | 0.51±0.08 | 5.9 | 200 |
3.2/1.6 | 3.2 | 1.6 | 0.51±0.08 | 7.0 | 200 |
4.8/2.4 | 4.8 | 2.4 | 0.51±0.08 | 9.6 | 200 |
6.4/3.2 | 6.4 | 3.2 | 0.64±0.08 | 15.6 | 200 |
9.5/4.8 | 9.5 | 4.8 | 0.64±0.08 | 22.2 | 122 |
12.7/6.4 | 12.7 | 6.4 | 0.64±0.08 | 27.0 | 122 |
15.9/7.9 | 15.9 | 7.9 | 0.76±0.15 | 37.6 | 61 |
19.1/9.5 | 19.1 | 9.5 | 0.76±0.15 | 47.2 | 61 |
22.2/11.1 | 22.2 | 11.1 | 0.89±0.15 | 60.2 | 61 |
25.4/12.7 | 25.4 | 12.7 | 0.89±0.15 | 67.6 | 61 |
31.8/15.9 | 31.8 | 15.9 | 1.02±0.20 | 90.4 | 30.4 |
38.1/19.1 | 38.1 | 19.1 | 1.02±0.20 | 115.4 | 30.4 |
50.8/25.4 | 50.8 | 25.4 | 1.14±0.20 | 157.9 | 30.4 |
Product diagram
Keyword:
S6/S6-TW Oil Resistant Polyolefin Elastomer Heat Shrink Tubing
Scan the QR code to read on your phone
About
Contact
Address: Tangjia Industrial Park, Shihe Street, Puwan New District, Dalian
Tel: 0411-87166661 87166662 0411-87166663 87166665
International line: +86-411-87166669
E-mail: upolymer@upolymer.com
Copyright: Union Polymer Material Co., Ltd. Powerby:300.cn dalian 辽ICP备05006450号-1